V-belt Optibelt 8V 1120 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 8V
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8V 1120 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8V 1120 RP and any equivalents.
This Optibelt 8V 1120 RP is a narrow wedge V-belt from the Red Power 3 S=C Plus series. It is built for high-load industrial drives where a compact, efficient belt is needed. The 8V profile and 2845 mm length identify the fit.
Narrow wedge V-belts like this 8V profile are common on drives that run at higher speeds and need to transmit more power without taking up extra space. You will find them on fans, pumps, compressors and other process equipment where the sheave grooves are cut for an 8V belt. The 2845 mm length is the datum length to match against your existing belt or drive specification.
To confirm fit, check the marking on the back of the old belt. It should show the profile and length, and the part number 8V 1120 RP may be printed there. If the old belt is worn or the marking is gone, measure the outside length and compare it to 2845 mm, and verify that the sheave grooves are 8V. When replacing a set, order the same number of belts and keep them as a matched set.
If you are unsure whether this is the right belt for your drive, send us the part number from the old belt, the sheave groove profile, and the length. We carry Optibelt and can help confirm the correct belt or suggest an equivalent.
Dimensions
- Section
- 8V
- Length
- 2845mm
Frequently asked questions
- What does the 8V profile mean on this Optibelt belt?
- The 8V profile is a narrow wedge V-belt cross-section. It fits sheaves machined for 8V belts and is used where a standard V-belt would be too wide for the required power.
- How do I confirm the length of the 8V 1120 RP?
- The length is 2845 mm. Compare this to the marking on your old belt or measure the old belt to confirm it matches. If the old belt is stretched, use the drive specification as the reference.
- Can you help if I need a different length or profile?
- Yes. Send us the part number, profile, and length you need by WhatsApp or email. We will check our Optibelt range and help you find the right belt or an equivalent.