Timing belt Optibelt 8MHP 1552

OPTIBELT 8MHP 1552 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8MHP 1552 and any equivalents.

The Optibelt 8MHP 1552 is an Omega HP timing belt with an HTD 8M profile, a 1552 mm length and an 8 mm pitch. Before you fit it, inspect the drive and the sheaves so the new belt runs true from the first start.

Check the sheaves for worn grooves, burrs, corrosion or embedded debris, and confirm they are aligned and running true. Look at the bearings, shafts and tensioner for play or roughness. A drive that is out of line or has damaged sheaves will shorten the life of any timing belt, including this one.

Confirm the part number on the old belt matches 8MHP 1552 and that the profile is HTD 8M with a 1552 mm length and 8 mm pitch. If the marking is worn, measure the old belt and check the drive configuration. Send the part number, the belt marking and a photo of the drive to MR by WhatsApp or email and the team will confirm the right belt or suggest an equivalent.

When you replace the belt, clean the sheaves, set the correct tension and rotate the drive by hand to check the tracking before running it under load. Keep the old belt as a reference until the new one is confirmed on the drive.