Timing belt Optibelt 8MHP 1480

OPTIBELT 8MHP 1480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8MHP 1480 and any equivalents.

This Optibelt Omega HP timing belt is identified by part number 8MHP 1480. It uses the HTD 8M profile with a length of 1480 mm, and the pitch is 8 mm. Use these three values to confirm the belt matches the drive before you order.

Timing belts in the HTD 8M profile are common on industrial drives where teeth mesh with matching pulleys to keep the driven shaft in step with the motor. This belt is a synchronous belt, so it is selected by profile, pitch and length rather than by outside circumference alone. The 8M profile and 8 mm pitch must match the pulley grooves, and the 1480 mm length must match the drive center distance and pulley sizes.

The most reliable way to confirm fit is to read the marking on the back of the old belt. Look for the profile, the length and the part number, then compare them with 8MHP 1480, HTD 8M and 1480 mm. If the old marking is worn or unreadable, measure the belt width and count the teeth if possible, and note the pulley part numbers. Send those details with your quote request and the team can help confirm the right belt or suggest an equivalent.

When you request a quote, include the part number 8MHP 1480 and the quantity needed. If you are replacing more than one belt on the same drive, list every position so each belt can be checked against the same profile and length. For drives that run more than one belt, replacing the full set at the same time helps keep load sharing even.