Timing belt Optibelt 8MFP 1800
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega Fan Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8MFP 1800 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8MFP 1800 and any equivalents.
The Optibelt 8MFP 1800 is a timing belt in the Omega Fan Power series, built for synchronous drives that need precise tooth engagement. It uses the HTD 8M profile with an 8 mm pitch and an 1800 mm length. This page covers where this belt is typically applied and how to confirm it fits your drive.
Timing belts in the HTD 8M profile are common on drives where the belt must transmit motion without slip, such as fans, blowers, and other industrial equipment. The 8MFP 1800 pairs the 8M tooth profile with an 1800 mm length, so it is selected by matching both the profile and the length to the pulleys and the center distance on the drive. If your current belt carries the same profile and length, this is the correct replacement.
To confirm fit, read the marking on the back of the old belt and compare it with the 8MFP 1800. Check that the profile is HTD 8M, the pitch is 8 mm, and the length is 1800 mm. Also inspect the pulleys for worn teeth, the flanges for damage, and the tensioner for proper operation before installing a new belt. Replacing a belt on a worn or misaligned drive can lead to premature failure.
If you are unsure whether this is the right belt for your equipment, send the part number, the belt marking, and the pulley details for a quote. Our team can confirm the belt or suggest an equivalent based on the profile and length you provide.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1800mm
Frequently asked questions
- What does the 8MFP 1800 fit?
- It is a timing belt with an HTD 8M profile, 8 mm pitch, and 1800 mm length. It fits drives that use that profile and length, such as certain fan and blower applications. Confirm by matching the profile and length to your existing belt.
- How do I confirm the length and profile?
- Check the marking on the back of your current belt. The profile should read HTD 8M and the length should be 1800 mm. You can also measure the pitch and count teeth, but the marking is the most reliable reference.
- Can you help if I don't have the part number?
- Yes. Send the belt marking, the pulley dimensions, and the drive details by WhatsApp or email. We will help identify the correct belt or an equivalent based on the profile and length.