Timing belt Optibelt 75 / T20 7600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 / T20 7600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 / T20 7600 AFX and any equivalents.
This Optibelt Alpha Flex timing belt carries the part number 75 / T20 7600 AFX. It is a synchronous belt with a T20 profile, a 7600 mm length and a 20 mm pitch. Use the marking on the back of the belt to confirm the part number before ordering.
Timing belts in this class are used on driven equipment where the belt teeth mesh with matching pulleys to keep the drive synchronized. The T20 profile and 7600 mm length identify the tooth form and the belt length, and the 20 mm pitch is the distance from one tooth center to the next. When you replace a belt of this type, read the full part number printed on the back of the old belt and compare it with 75 / T20 7600 AFX.
To confirm fit, check that the profile, length and pitch match your drive. The T20 profile must match the pulley groove, and the 7600 mm length and 20 mm pitch must match the original belt. If the marking is worn or unreadable, measure the old belt and count the teeth, then send those details with your quote request.
We carry the Optibelt 75 / T20 7600 AFX Alpha Flex timing belt. Send the part number by WhatsApp or email to request a quote. If you are unsure of the number, include the belt marking, profile, length, pitch and tooth count, and our team will help confirm the right belt.
Dimensions
- Profile
- T20
- Pitch
- 20mm
- Length
- 7600mm
Frequently asked questions
- How do I confirm that the Optibelt 75 / T20 7600 AFX is the right belt for my drive?
- Check the marking on the back of the old belt. The profile must be T20, the length must be 7600 mm and the pitch must be 20 mm. If the marking is not readable, measure the length and count the teeth, then send those details with your quote request.
- What does the 20 mm pitch mean on this timing belt?
- The 20 mm pitch is the distance from the center of one tooth to the center of the next. The belt must match the pitch of the pulleys on the drive.
- What should I send to request a quote for this belt?
- Send the part number 75 / T20 7600 AFX by WhatsApp or email. If you do not have the number, send the belt marking, profile, length, pitch and tooth count, and we will help confirm the right belt.