Timing belt Optibelt 75 / T20 3800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 / T20 3800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 / T20 3800 AFX and any equivalents.
This Optibelt Alpha Flex timing belt carries the code 75 / T20 3800 AFX. It has a T20 profile, a 3800 mm length and a 20 mm pitch. Use these three values to match it against the belt you are replacing.
Start with the marking on the back of the old belt. If it reads T20 with a 3800 mm length, this belt matches the profile and length directly. Confirm the pitch is 20 mm before you order, since the profile, length and pitch together define the belt.
If the old marking is worn or unreadable, measure the belt and count the teeth. A T20 profile with a 20 mm pitch and a 3800 mm length points to this Optibelt Alpha Flex belt. Send us the code 75 / T20 3800 AFX, or your old part number, and our team will confirm it or suggest an equivalent.
For drives that run more than one belt, replace the full set at the same time so the load stays even. Check the pulleys for wear or debris and confirm the tension is set to the drive manufacturer's specification before restarting.
Dimensions
- Profile
- T20
- Pitch
- 20mm
- Length
- 3800mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the marking on the old belt for T20, 3800 mm and 20 mm pitch. If those match, this Optibelt Alpha Flex belt is the correct profile and length. If the marking is unreadable, measure the length and pitch and send us the numbers.
- What should I send for a quote?
- Send the part number 75 / T20 3800 AFX, or the marking from your old belt, by WhatsApp or email. If you have the drive make and model, include that as well. Our team will reply promptly to confirm the belt or suggest an equivalent.
- Should I replace all belts on the drive at once?
- Yes. On drives with multiple belts, replace them as a set so they share the load evenly. Mixing a new belt with used ones can cause uneven tension and premature wear.