Timing belt Optibelt 75 / 5M 9800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 / 5M 9800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 / 5M 9800 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 75 / 5M 9800 AFX. It uses the HTD 5M profile with a 5 mm pitch and a 9800 mm length. It is a synchronous belt for drives that need tooth engagement rather than friction.
Long-length timing belts like this one are common on wide, slow-turning drives where the belt runs over two or more pulleys and must keep a fixed relationship between them. Because the teeth mesh with the pulley grooves, the belt is used where slip is not acceptable. The HTD 5M profile and 5 mm pitch determine the pulley groove form and tooth spacing, so the pulleys on the drive must match that profile.
To confirm fit, read the marking on the back of the old belt and compare it with the code above. Check that the profile is HTD 5M, the pitch is 5 mm, and the length is 9800 mm. Also confirm the width your drive requires, since the code includes a width figure. If the old belt is worn or the marking is unreadable, measure the length and count the teeth, then send those details with your request.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 9800mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Match the profile, pitch and length to your drive: HTD 5M, 5 mm pitch, 9800 mm. Check the width against the old belt or the pulley. If you are unsure, send the belt marking or your measurements and we will help confirm.
- What should I send to get a quote?
- Send the part number 75 / 5M 9800 AFX, or the profile, pitch, length and width from your old belt. A photo of the back marking also helps. We reply by WhatsApp or email.
- Can you help if I do not have the part number?
- Yes. Send the belt marking, the pulley details, or the measured length and tooth count. We will check the data and suggest the right belt for your drive.