Timing belt Optibelt 75 / 5M 9400 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 / 5M 9400 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 / 5M 9400 AFX and any equivalents.
This Optibelt Alpha Flex belt is a timing belt with an HTD 5M profile and a 9400 mm length. The part number 75 / 5M 9400 AFX identifies the profile and length so you can match it directly to your drive.
The HTD 5M profile is a synchronous belt profile with a 5 mm pitch. The 9400 mm length is the datum length for this belt. When you read the marking on the back of your old belt, confirm that it shows the same profile and length before ordering.
Because timing belts are often replaced as part of a drive refresh, check the pulleys for wear and make sure the belt is tensioned to the drive manufacturer's specification. If you are replacing more than one belt on the same drive, it is good practice to replace them as a set so the load is shared evenly.
To request a quote, send the part number 75 / 5M 9400 AFX by WhatsApp or email. If you are unsure about the exact belt, include a photo of the back marking and the pulley teeth so we can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 9400mm
Frequently asked questions
- What do the profile and length mean on this belt?
- The profile is HTD 5M, which is a synchronous belt profile with a 5 mm pitch. The length is 9400 mm. These two dimensions are the main things to match when replacing the belt.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of your existing belt. It should show the same profile and length. You can also count the pulley teeth and measure the pulley diameter to cross-check the pitch.
- What should I send to get a quote?
- Send the part number 75 / 5M 9400 AFX by WhatsApp or email. If you have any doubt, include a photo of the old belt marking and the pulleys so we can help confirm the right belt or suggest an equivalent.