V-belt Optibelt 5VX 1250 XEP

OPTIBELT 5VX 1250 XEP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5VX 1250 XEP and any equivalents.

This is the Optibelt 5VX 1250 XEP, a cogged narrow V-belt from the Super XE-Power Pro M=S series. It is the belt to specify when you are matching a 5VX profile and a 3175 mm length. Use the marking on the old belt to confirm both before you order.

Start with the belt you are replacing. Read the back of it: you are looking for the profile and the length. The profile here is 5VX, a narrow V-belt profile, and the length is 3175 mm. If the old belt shows the same profile and the same length, this Optibelt belt matches the size. Cogged construction is part of this belt's type, so if the original is a cogged narrow V-belt, that is consistent.

If the marking is worn or unreadable, measure the old belt and note the profile and length, then send those two values with the part number 5VX 1250 XEP. We carry Optibelt and can confirm the belt against your drive. When a drive runs more than one belt, replace the full set at the same time so all belts share the same profile and length and wear evenly.

Before the new belt goes on, inspect the drive: check the pulleys for wear and alignment, and confirm the belt tension is set to the drive manufacturer's specification. A worn pulley can shorten the life of a correctly sized belt. Keep the old belt marking on file so the next replacement is a direct match.