V-belt Optibelt 5VX 1180 XEP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- Super XE-Power Pro M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5VX 1180 XEP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5VX 1180 XEP and any equivalents.
This Optibelt 5VX 1180 XEP is a cogged narrow V-belt from the Super XE-Power Pro M=S series. It is used on industrial drives that call for a 5VX profile and a 2997 mm belt length. Confirm both the profile and the length against your drive before ordering.
Cogged narrow V-belts like this one are common on fans, pumps, compressors and other driven equipment where a compact, high-capacity drive is required. The cogged construction is typical of drives that run over smaller pulleys, where a standard wrapped belt may not flex as readily. The 5VX profile and 2997 mm length are the two dimensions to match.
To confirm fit, read the marking on the back of the belt you are replacing. It should show a 5VX profile and a length matching 2997 mm. Also check the pulley grooves for wear and the drive for correct alignment. If the old belt marking is worn or missing, measure the outside length and compare it with the 2997 mm figure.
On multi-belt drives, replace all belts in the set at the same time so the load stays evenly divided. Send the part number 5VX 1180 XEP, the quantity you need and the drive details by WhatsApp or email. The team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- 5VX
- Length
- 2997mm
Frequently asked questions
- What does the 5VX profile mean on this Optibelt belt?
- The 5VX profile identifies the belt cross-section and its intended pulley groove. Match it to the pulley on your drive and to the marking on the belt you are replacing.
- How do I confirm the length of the 5VX 1180 XEP?
- The belt length is 2997 mm. Compare this with the marking on your old belt or measure the drive to confirm it before requesting a quote.
- What should I send to request a quote?
- Send the part number 5VX 1180 XEP, the quantity required and any drive details you have. The team will reply by WhatsApp or email.