Timing belt Optibelt 5MHP 1790
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5MHP 1790 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5MHP 1790 and any equivalents.
The Optibelt 5MHP 1790 is an Omega HP timing belt with an HTD 5M profile and a 1790 mm length. This synchronous belt has a 5 mm pitch and is identified by the part number 5MHP 1790. To confirm it for your drive, send the part number and your application details for a quote.
When requesting a quote, include the complete belt marking: Optibelt 5MHP 1790, Omega HP, HTD 5M, 1790 mm length, and 5 mm pitch. If you are replacing an existing belt, a photo of the back marking helps verify the profile and length. You can also share the drive arrangement and any relevant pulley information so we can check the fit.
The HTD 5M profile and 1790 mm length are the key dimensions for this belt. The 5 mm pitch defines the tooth spacing. If your drive uses a different profile or length, we can help you find the correct Optibelt timing belt. Send the old belt's marking or the machine's belt specification for assistance.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 1790mm
Frequently asked questions
- What details should I include when requesting a quote for the Optibelt 5MHP 1790?
- Provide the full part number 5MHP 1790, the profile HTD 5M, the length 1790 mm, and the pitch 5 mm. If possible, include a photo of the belt marking and the drive setup.
- Can you help if I am not sure this is the right belt?
- Yes. Send the marking from your old belt or the machine's belt specification. We will confirm whether the 5MHP 1790 matches or suggest an equivalent.
- How do I identify the Optibelt 5MHP 1790 on the belt itself?
- Look for the part number 5MHP 1790 and the profile HTD 5M printed on the back of the belt. The length 1790 mm and pitch 5 mm may also be marked.