Timing belt Optibelt 5MHP 1690
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5MHP 1690 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5MHP 1690 and any equivalents.
The Optibelt 5MHP 1690 is an Omega HP timing belt with an HTD 5M profile, a 1690 mm length and a 5 mm pitch. Before fitting it, inspect the drive and sheaves so the new belt runs true and lasts.
Check sheave grooves for wear, burrs or debris, and confirm the sheaves are aligned. Worn or misaligned sheaves can damage a new belt quickly, so correct any issues before installation. Also check bearings, shafts and tensioning hardware for play or roughness.
Verify the belt marking on the old part matches the Optibelt 5MHP 1690: HTD 5M profile, 1690 mm length, 5 mm pitch. If the drive uses multiple belts, replace them as a set to keep loads even. Send the part number and any photos of the old belt or sheaves for a quote.
After fitting, recheck tension and alignment, then run the drive briefly and inspect the belt for proper seating. Confirm the belt sits correctly in the grooves and that no rubbing or unusual noise occurs. Address any problems before returning the drive to service.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 1690mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, burrs or debris, verify sheave alignment, and check bearings, shafts and tensioning hardware for play or roughness. Correct any issues before fitting the new belt.
- How do I confirm this is the right belt for my drive?
- Compare the marking on the old belt to the Optibelt 5MHP 1690: HTD 5M profile, 1690 mm length, 5 mm pitch. If it matches, the belt is the correct size.
- What information do I need to request a quote?
- Send the part number 5MHP 1690 and the quantity you need. Photos of the old belt or the sheaves can help confirm the correct part.