Timing belt Optibelt 5M 790
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5M 790 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5M 790 and any equivalents.
The Optibelt Omega 5M 790 is a timing belt with an HTD 5M profile and a 790 mm length. Its 5 mm pitch makes it a synchronous belt for drives where tooth engagement and positioning matter. Before you fit a new belt, take a few minutes to check the drive and sheaves.
Inspect the sheaves for worn or hooked teeth, debris in the grooves and any runout or misalignment. Check that the shafts and bearings turn freely and that the tensioner, if present, moves correctly. A new timing belt on a worn drive can wear quickly or run noisily, so correcting sheave and alignment issues first protects the replacement.
Confirm the belt marking on the back of the old belt matches the profile and length you need. This Optibelt Omega belt is identified as 5M 790, with an HTD 5M profile and 790 mm length. If the old marking is unreadable, measure the drive and send the details for confirmation.
For a quote, send the part number 5M 790 and the quantity you need. If you are replacing belts on a multi-belt drive, note all positions so the set can be quoted together. We carry Optibelt belts and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 790mm
Frequently asked questions
- What should I check before installing this timing belt?
- Check the sheaves for wear, debris and alignment, and confirm the shafts and tensioner move freely. Correcting drive issues before fitting the belt helps the new belt run properly.
- How do I confirm the 5M 790 is the right belt?
- Read the marking on the back of the old belt and compare it with the 5M 790 part number, HTD 5M profile and 790 mm length. If the marking is gone, send the drive details for confirmation.
- What do you need to quote this Optibelt belt?
- Send the part number 5M 790 and the quantity required by WhatsApp or email. If you are replacing several belts, include the positions so the set can be quoted.