Timing belt Optibelt 5M 755
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5M 755 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5M 755 and any equivalents.
This page covers the Optibelt Omega 5M 755, a timing belt with an HTD 5M profile, a 755 mm length and a 5 mm pitch. It is the belt to reference when replacing a worn synchronous belt on a drive that uses this profile and length. We carry it and quote by part number.
To match the belt being replaced, read the marking on the back of the old belt. Confirm the profile is HTD 5M, the length is 755 mm and the pitch is 5 mm. If the marking is worn or missing, measure the old belt and count the teeth so the profile and length can be verified before you order.
A timing belt that no longer matches the drive will not run correctly. Check the pulleys for wear, confirm the belt sits properly in the grooves, and inspect the tensioner and idler. If the drive uses more than one belt, replace them as a set so the load is shared evenly.
Send the part number 5M 755, along with the profile and length from the old belt, by WhatsApp or email. Our team replies promptly and can help confirm this belt or suggest an equivalent if the exact marking is unclear. We supply maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 755mm
Frequently asked questions
- How do I confirm the Optibelt Omega 5M 755 is the right belt?
- Check the marking on the back of the belt you are replacing. It should show the HTD 5M profile, a 755 mm length and a 5 mm pitch. If the marking is not clear, measure the old belt and count the teeth, then send those details with the part number.
- What should I send to request a quote?
- Send the part number 5M 755 and any details from the old belt, such as the profile, length and pitch. If you have a photo of the marking or the old belt, include that as well. We reply promptly by WhatsApp or email.
- Can you help if the old belt marking is worn off?
- Yes. Send the drive details and the dimensions you can measure from the old belt, along with the part number if you have it. We can help confirm the profile and length or suggest an equivalent.