Timing belt Optibelt 5M 360

OPTIBELT 5M 360 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5M 360 and any equivalents.

This is the Optibelt Omega timing belt with part number 5M 360. Two figures identify it on the shelf: the HTD 5M profile and the 360 mm length. The 5 mm pitch is the spacing that has to match your pulleys.

The profile tells you the tooth shape and the pitch the belt is built to run on. HTD 5M is a synchronous profile with a 5 mm pitch, so the belt seats into pulleys cut for that same profile and pitch. If the pulleys on your drive are HTD 5M, this is the correct tooth form. A belt of another profile will not mesh correctly, even at the same length.

The length is given as 360 mm. That is the figure to check against the old belt and against the drive layout before you order. On a synchronous drive the length has to suit the pulley diameters and the center distance, because there is no slip to take up a mismatch.

The cleanest way to confirm the part is to read the marking on the back of the belt you are replacing and send that number to us by WhatsApp or email. If the marking is worn off, send the profile and the length you measured, along with the pulley details, and we will help confirm the right belt or suggest an equivalent.