Timing belt Optibelt 5M 345 (HTD)
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5M 345 (HTD) belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5M 345 (HTD) and any equivalents.
This Optibelt Omega timing belt is an HTD 5M profile belt with a 345 mm length and a 5 mm pitch. It is used in drives where a synchronous belt must mesh with matching HTD pulleys, such as positioning, conveying and light industrial power transmission. Confirm fit by checking the profile and length against the old belt and the pulley grooves.
On a timing belt drive, the belt teeth engage the pulley grooves, so the profile and pitch must match the pulleys exactly. The 5M profile and 5 mm pitch identify the tooth geometry, while the 345 mm length sets the center distance. If the old belt is worn or the marking is unreadable, measure the length and inspect the pulley grooves before ordering.
A belt that is too long or too short will not tension correctly, and a mismatched profile will not seat in the grooves. When you replace a timing belt, inspect the pulleys for wear, check the tensioner and verify alignment. If you are unsure of the correct belt, send the full marking from the back of the old belt, the pulley part numbers or a photo to MR by WhatsApp or email, and the team will confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 345mm
Frequently asked questions
- How do I confirm this Optibelt Omega 5M 345 belt fits my drive?
- Check that the old belt is marked HTD 5M and 345 mm, and that the pulleys are HTD 5M with a 5 mm pitch. If the marking is worn, measure the belt length and inspect the pulley grooves. Send those details to MR for confirmation.
- What should I send to request a quote for this belt?
- Send the part number 5M 345 (HTD), the brand Optibelt, the series Omega, and the profile and length from the old belt. If you have the pulley part numbers, include those as well. MR will reply promptly by WhatsApp or email.
- Can MR help if I need a different length or profile?
- Yes. If the 345 mm length or 5M profile does not match your drive, send the correct profile and length from the old belt or the pulley details. MR can confirm the right belt or suggest an equivalent.