Timing belt Optibelt 5M 180

OPTIBELT 5M 180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5M 180 and any equivalents.

This Optibelt Omega timing belt is identified by its HTD 5M profile and 180 mm length. The 5 mm pitch and HTD 5M profile define the tooth geometry that must match your drive's pulleys.

The part number 5M 180 combines the profile and the length. The HTD 5M profile has a 5 mm pitch, so the belt teeth are spaced to mesh with HTD 5M pulleys. The 180 mm length is the datum length for the belt. When you read the marking on the back of an existing belt, confirm that it shows the same profile and length before ordering.

For a correct quote, send the part number 5M 180, the quantity, and a photo of the belt marking if one is readable. If you are replacing a belt on a drive where the original marking is worn, measure the length and count the teeth to confirm the profile. The Optibelt Omega series is a timing belt line we carry, and we can help you match the 5M 180 to your application.

HTD 5M profile belts are used in drives that require synchronous power transmission. The 180 mm length is compact, so verify that the belt routing and pulley diameters allow for proper installation and tensioning. If you need assistance confirming that this belt fits your drive, contact us with the part number and any drive details you have.