Timing belt Optibelt 536 8M
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 536 8M belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 536 8M and any equivalents.
The Optibelt 536 8M is a timing belt from the Omega High Power series. It has an HTD 8M profile, a length of 536 mm and a pitch of 8 mm. If the marking on your old belt reads 536 8M, this is the belt to quote.
When a drive is down, the fastest way to identify the replacement is to read the back of the old belt. Look for the profile and length: HTD 8M and 536 mm. The Optibelt 536 8M carries both, so it matches drives specified for that profile and length. Confirm the marking before ordering, especially if the belt has been replaced before.
This is a synchronous belt, so it transmits motion through teeth rather than friction. The HTD 8M profile and 536 mm length define the fit on the pulleys. The 8 mm pitch is the distance between tooth centers and must match the pulley groove. If the old belt is worn or the marking is unreadable, measure the length and count the teeth to verify.
Send the part number 536 8M by WhatsApp or email to request a quote. If you are unsure whether this is the correct belt for your drive, include a photo of the old belt marking and the pulley. We carry Optibelt and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 536mm
Frequently asked questions
- How do I confirm that the Optibelt 536 8M is the right belt for my drive?
- Read the marking on the back of the old belt. It should show the profile and length, such as HTD 8M and 536 mm. If the marking matches, the 536 8M is the correct profile and length. If it is unreadable, measure the belt length and check the pulley groove profile.
- What does the 8M in the part number refer to?
- The 8M indicates the HTD profile and the 8 mm pitch. The pitch is the distance between tooth centers. This must match the pulley grooves for the belt to seat correctly.
- Can you help if I am not sure the 536 8M fits?
- Yes. Send the part number and a photo of the old belt marking or the drive setup by WhatsApp or email. We will help confirm the right belt or suggest an equivalent.