Timing belt Optibelt 520 8M SL 470 HILO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Load
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 520 8M SL 470 HILO belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 520 8M SL 470 HILO and any equivalents.
This Optibelt 520 8M SL 470 HILO is a timing belt from the Omega High Load series. It has an HTD 8M profile, a 520 mm length, and an 8 mm pitch. Use it where a synchronous drive needs precise positioning and power transmission.
Timing belts like this are common on drives where the belt teeth mesh with pulley grooves to keep the driven shaft in step with the driver. You will find them on equipment such as compressors, pumps, and other industrial machinery that requires synchronization rather than friction-based power transfer.
To confirm fit, check the old belt's marking for the profile and length. The HTD 8M profile and 520 mm length must match your drive's pulleys and center distance. If the marking is worn, measure the belt width and count the teeth to verify the profile, and compare the length to the original specification.
When you request a quote, send the part number 520 8M SL 470 HILO and any details from the old belt. Our team can help confirm the correct belt or suggest an equivalent based on the profile and length.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 520mm
Frequently asked questions
- What does the 520 8M marking mean on this Optibelt belt?
- The 520 indicates the length in millimeters, and 8M indicates the HTD profile with an 8 mm pitch. This belt is part of the Omega High Load series.
- How do I confirm this timing belt fits my drive?
- Check that your pulleys are designed for an HTD 8M profile and that the required belt length is 520 mm. The old belt's back marking usually shows the profile and length.
- What information should I send to request a quote?
- Send the part number 520 8M SL 470 HILO, along with the old belt's marking if visible. If you need help identifying the belt, include the pulley tooth count and the distance between shaft centers.