Timing belt Optibelt 50 AT20 / 2900 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 AT20 / 2900 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 AT20 / 2900 AFX and any equivalents.
When you are replacing a timing belt, start by reading the marking on the back of the old belt and matching it to the replacement. This Optibelt Alpha Flex belt is identified as 50 AT20 / 2900 AFX, with an AT20 profile, a 2900 mm length and a 20 mm pitch. Confirm each of those values against the belt you are removing before you request a quote.
The part number 50 AT20 / 2900 AFX carries the profile and the length in the same string, so a direct comparison is straightforward. Check that the belt on the drive is marked AT20 and 2900 mm, and that the pitch is 20 mm. If the old belt is worn or the marking is no longer legible, measure the length and confirm the profile before ordering.
Because this is a timing belt, the profile and pitch must match the pulleys. The AT20 profile and 20 mm pitch are fixed characteristics of this belt, and the 2900 mm length is given in millimeters. Any deviation in profile, pitch or length will prevent correct fit and timing.
To request a quote, send the part number 50 AT20 / 2900 AFX, or the details from the back of your old belt, by WhatsApp or email. We carry the Optibelt Alpha Flex line and can help confirm that this belt matches the one being replaced.
Dimensions
- Profile
- AT20
- Pitch
- 20mm
- Length
- 2900mm
Frequently asked questions
- How do I match this belt to the one I am replacing?
- Read the marking on the back of the old belt and compare it to 50 AT20 / 2900 AFX. Confirm the AT20 profile, the 2900 mm length and the 20 mm pitch. If the marking is worn, measure the old belt and note the profile before requesting a quote.
- What information should I send for a quote?
- Send the part number 50 AT20 / 2900 AFX, or the full marking from your old belt, by WhatsApp or email. If you have the profile, length and pitch, include those as well so we can confirm the match.
- Does this belt fit my drive?
- This belt has an AT20 profile, a 2900 mm length and a 20 mm pitch. It fits drives that specify those same values. Compare them to your pulley and belt marking before ordering.