Timing belt Optibelt 50 AT20 / 2600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 AT20 / 2600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 AT20 / 2600 AFX and any equivalents.
The Optibelt 50 AT20 / 2600 AFX is an Alpha Flex timing belt in the AT20 profile with a 2600 mm length and a 20 mm pitch. Before you fit it, inspect the drive and the sheaves it runs on. A worn or misaligned drive shortens the life of any new belt.
Check the sheave grooves for wear, damage and buildup, and confirm the sheaves are clean and aligned. Look at the bearings and the shaft for play, and check that the drive turns freely by hand. Correct any fault you find before the belt goes on.
Compare the new belt against the one you removed. Read the marking on the back of the old belt and match the profile, the length and the pitch. The AT20 profile, the 2600 mm length and the 20 mm pitch on this Optibelt Alpha Flex belt are the values to confirm.
On a multi-belt drive, replace the full set together so the load stays even across the belts. For a quote, send the part number 50 AT20 / 2600 AFX and the quantity you need by WhatsApp or email.
Dimensions
- Profile
- AT20
- Pitch
- 20mm
- Length
- 2600mm
Frequently asked questions
- What do I need to send for a quote on this belt?
- Send the part number 50 AT20 / 2600 AFX, the quantity, and any details about the drive you are working on. Messages go to the team by WhatsApp or email, and they reply promptly.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt you are replacing and match it against the AT20 profile, the 2600 mm length and the 20 mm pitch. If the marking is worn or missing, send the drive details and the team can help confirm the right belt.
- Should I replace more than one belt at a time?
- Where a drive runs more than one belt, replace them as a set so the load is shared evenly. Fit the set only after the sheaves, alignment and bearings have been checked.