Timing belt Optibelt 50 / 5M 10800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 / 5M 10800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 / 5M 10800 AFX and any equivalents.
The Optibelt 50 / 5M 10800 AFX is an Alpha Flex timing belt with an HTD 5M profile and a 10800 mm length. It is built for drives that use a 5 mm pitch synchronous belt. To match the belt being replaced, compare the profile, pitch and length on the old belt to these values.
The easiest way to confirm a match is to read the marking on the back of the belt you are replacing. Look for the profile and the length, then compare them to the HTD 5M profile and 10800 mm length of this belt. The 5 mm pitch is set by the profile. If the marking is worn off, measure the pitch and the overall length and check the pulley grooves.
Send the part number, the profile, the pitch and the length when you request a quote. Photos of the old belt and of the drive, including the pulleys, help us confirm the right belt. If a belt is not the correct one, we can help identify the correct Optibelt belt or a suitable equivalent.
Replace timing belts as a set when the drive uses more than one belt, and inspect the pulleys for wear at the same time. A worn pulley can damage a new belt. For drives that run continuously, keep a record of the belt marking so the next replacement is straightforward.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 10800mm
Frequently asked questions
- How do I match this belt to the one I am replacing?
- Check the marking on the back of the old belt. It should show the profile and length. This belt is HTD 5M profile, 5 mm pitch and 10800 mm length. If the marking is unreadable, measure the pitch and length and inspect the pulley grooves.
- What information should I send with my quote request?
- Send the part number 50 / 5M 10800 AFX, along with the profile, pitch and length. Photos of the old belt and the drive help us confirm the match. If you need an equivalent, include the details of the current belt.
- Should I replace more than one belt at a time?
- On drives that use multiple belts, replace them as a set. Also inspect the pulleys for wear. A worn pulley can shorten the life of a new belt.