V-belt Optibelt 4-SPC 6000 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 4-SPC 6000 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 4-SPC 6000 BP2 and any equivalents.
The Optibelt 4-SPC 6000 BP2 is a banded V-belt from the KB Blue Power 2 series, with a length of 6000 mm. When you need to replace a belt on a driven machine, the marking on the back of the old belt is the most reliable starting point. Read it carefully and match the part number exactly.
The marking usually shows the profile, the number of ribs or strands, and the length. On this belt, the code is 4-SPC 6000 BP2. The 6000 mm length is the datum length for this banded V-belt. If the old belt is worn or dirty, clean the back with a cloth so the characters are legible before you write down the number.
A banded V-belt is built as multiple V-belts joined by a top tie band. That construction keeps the belts from turning over or jumping off the pulley grooves under pulsating loads. The KB Blue Power 2 series from Optibelt is designed for drives where a single belt would not stay in place. This belt uses the SPC profile, which is a narrow wedge profile.
If the marking is unreadable, measure the outside circumference and note the profile and the number of ribs. Send those details along with the part number you found. Our team can confirm the correct belt or suggest an equivalent based on the data you provide.
Dimensions
- Length
- 6000mm
Frequently asked questions
- How do I read the marking on my old belt?
- Look for a printed or molded code on the back of the belt. It typically includes the profile, the number of strands, and the length. For this belt, the marking is 4-SPC 6000 BP2. Write it down exactly as it appears.
- What if the marking is worn off?
- Measure the outside circumference of the belt and note the cross-section profile and the number of ribs. Send those measurements along with any partial numbers you can read, and we will help identify the correct replacement.
- Can you help confirm the right belt?
- Yes. Send us the part number from the old belt, or the profile, number of ribs, and length. We will check it against the Optibelt 4-SPC 6000 BP2 and reply with a quote.