Timing belt Optibelt 3MHP 294
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3MHP 294 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3MHP 294 and any equivalents.
The Optibelt 3MHP 294 is a timing belt from the Omega HP series. It uses an HTD 3M profile and measures 294 mm in length with a 3 mm pitch. The profile and length are the two dimensions you need to match the belt to the drive.
The HTD 3M profile identifies the tooth geometry of this synchronous belt. The 294 mm length is the datum you compare against the original belt or the drive layout. The 3 mm pitch is the center-to-center distance between adjacent teeth, so it must agree with the matching pulleys.
When you read the back of an old belt, look for the profile marking and the length. If the marking is worn or missing, measure the old belt and confirm the pulley tooth profile before ordering. A belt with the wrong pitch or profile will not seat correctly in the grooves.
For a quote, send the part number 3MHP 294, the profile HTD 3M, and the length 294 mm. If you are replacing a belt on a drive where the original marking is unclear, include a photo of the old belt and the pulley teeth so we can help confirm the right timing belt.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 294mm
Frequently asked questions
- What do the profile and length mean on the Optibelt 3MHP 294?
- The profile is HTD 3M, which defines the tooth shape and the 3 mm pitch. The length is 294 mm. Both values must match the drive and pulleys for the belt to run correctly.
- How do I confirm this is the right timing belt for my drive?
- Check the marking on the back of the old belt for the profile and length. If it is not readable, measure the old belt and verify the pulley tooth profile and pitch before ordering.
- What should I send to request a quote for the 3MHP 294?
- Send the part number 3MHP 294, the profile HTD 3M, and the length 294 mm. If the old belt marking is unclear, include a photo of the belt and the pulley teeth.