Timing belt Optibelt 3MHP 288
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3MHP 288 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3MHP 288 and any equivalents.
The Optibelt 3MHP 288 is an Omega HP timing belt with an HTD 3M profile, a 288 mm length, and a 3 mm pitch. This page helps you match it to the belt you are replacing. Request a quote by part number via WhatsApp or email.
Start by reading the marking on the back of the belt you are replacing. Confirm the profile reads HTD 3M and the length reads 288 mm. The 3 mm pitch is part of the same marking. If the belt is worn or the print is gone, measure the length and check the tooth profile against the Optibelt 3MHP 288.
The Optibelt 3MHP 288 is a timing belt from the Omega HP series. It is built for synchronous drives where the belt teeth mesh with pulley grooves. When you replace a timing belt, inspect the pulleys for wear, check the alignment of the drive, and confirm the tension is set to the drive manufacturer's specification.
If you are unsure whether the Optibelt 3MHP 288 is the correct replacement, send a photo of the old belt marking and the drive setup. Our team can confirm the profile and length or suggest an equivalent. We carry Optibelt belts and serve customers across the United States, Canada, Mexico, and South America.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 288mm
Frequently asked questions
- How do I confirm the Optibelt 3MHP 288 is the right belt for my drive?
- Check the marking on the back of your old belt. It should show HTD 3M profile, 288 mm length, and 3 mm pitch. If the marking is unreadable, measure the belt length and count the teeth to verify the pitch.
- What should I inspect when replacing a timing belt?
- Inspect the pulleys for worn grooves or debris, check that the drive is aligned, and set the belt tension according to the drive manufacturer's specification. Replacing a timing belt is a good time to check the entire drive for wear.
- Can you help if I cannot find the part number on my old belt?
- Yes. Send a photo of the old belt and any markings you can see, along with the drive setup details. We can confirm whether the Optibelt 3MHP 288 matches or suggest an equivalent.