Timing belt Optibelt 3M 174
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3M 174 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3M 174 and any equivalents.
The Optibelt 3M 174 is an Omega timing belt with an HTD 3M profile, a 174 mm length and a 3 mm pitch. If you are replacing a belt on a small-pitch synchronous drive, this page gives you the data you need to match it correctly.
The most reliable way to match this belt is to read the marking on the back of the belt you are removing. Compare the profile, the length and the pitch against the values above. A belt that is the same length but a different profile will not seat correctly in the pulley grooves, so check all three before you order.
Once you have confirmed the marking, send the part number to our team by WhatsApp or email. We carry the Optibelt 3M 174 and can confirm it against your application details. If you are unsure, include a photo of the old belt and the pulley so we can help you verify the match.
Inspect the pulleys and the drive while the belt is off. Look for worn grooves, debris or misalignment that could shorten the life of the new belt. Replacing the belt on a clean, correctly aligned drive helps it run as intended.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 174mm
Frequently asked questions
- How do I confirm the Optibelt 3M 174 is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. The profile should read HTD 3M, the length should be 174 mm and the pitch should be 3 mm. If those match, the belt is the correct size.
- What information should I send with my quote request?
- Send the part number, 3M 174, along with the profile and length from your old belt. A photo of the belt and the pulley is helpful if the marking is worn or hard to read.
- Can I use a belt with the same length but a different profile?
- No. The profile must match the pulley grooves. A belt with the same length but a different profile will not run correctly on the drive.