Timing belt Optibelt 3M 168
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 3M 168 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3M 168 and any equivalents.
When a drive is down, the fastest way to confirm the replacement is to read the marking on the back of the old belt. This Optibelt Omega belt is identified by its part number 3M 168, with an HTD 3M profile and a 168 mm length. Use those three details to match what is currently on the drive.
The marking on a timing belt typically shows the profile and the length, which is why 3M 168 is the key reference here. The profile is HTD 3M, the length is 168 mm, and the pitch is 3 mm. If the old belt is worn or dirty, clean the back before reading it so the characters are clear.
Once you have the marking, compare it directly to the part number and the profile and length on this page. If the numbers match, you are looking at the same size. If the marking is unreadable, send a photo of the belt and the drive pulleys with your quote request so the team can help confirm the correct belt.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 168mm
Frequently asked questions
- How do I identify the belt I need?
- Read the marking on the back of the old belt. The profile and length are usually printed there. For this belt, the part number is 3M 168, the profile is HTD 3M, and the length is 168 mm.
- What should I send for a quote?
- Send the part number 3M 168, or the profile and length from the old belt marking. A photo of the belt and the drive helps if the marking is worn.
- Does the pitch matter when matching a timing belt?
- Yes. This belt has a 3 mm pitch, which is part of the HTD 3M profile. Confirm the pitch along with the profile and length when comparing to the old belt.