Timing belt Optibelt 32 AT10K13 / 8600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 32 AT10K13 / 8600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32 AT10K13 / 8600 AFX and any equivalents.
This page covers the Optibelt Alpha Flex timing belt with the code 32 AT10K13 / 8600 AFX. It is an AT10 profile belt with a length of 8600 mm and a pitch of 10 mm. Use these three values to match it against the belt you are replacing.
Start with the marking on the back of the belt you are taking off. The code 32 AT10K13 / 8600 AFX identifies this belt, so a like-for-like replacement means the same profile, the same length and the same pitch. Confirm the AT10 profile, the 8600 mm length and the 10 mm pitch against your drive before you order, since a belt that reads close on one value can still be the wrong item.
If the back of the old belt is worn or the marking cannot be read, measure the drive instead. Count the teeth and check the pulley grooves so the profile and pitch are confirmed, then work out the belt length around the pulleys. Send those findings with your quote request and we will check them against the code on this page.
We carry the Optibelt Alpha Flex line and quote by part number. Send the code 32 AT10K13 / 8600 AFX, or the profile, length and pitch you measured, by WhatsApp or email. If the exact belt is not the right fit for your drive, we can help confirm the correct belt or suggest an equivalent.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 8600mm
Frequently asked questions
- What do I need to match this belt to the one being replaced?
- The AT10 profile, the 8600 mm length and the 10 mm pitch, plus the code 32 AT10K13 / 8600 AFX. Check the marking on the back of the old belt first.
- What if the marking on the old belt is no longer readable?
- Measure the drive instead. Confirm the profile and pitch from the pulley grooves and teeth, then determine the belt length. Send those values and we will match them to this belt.
- How do I request a quote for this belt?
- Send the part number 32 AT10K13 / 8600 AFX by WhatsApp or email. If you have the profile, length and pitch from your own measurement, include those as well.