Timing belt Optibelt 32 AT10K13 / 8400 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 32 AT10K13 / 8400 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32 AT10K13 / 8400 AFX and any equivalents.
The Optibelt 32 AT10K13 / 8400 AFX is a timing belt in the Alpha Flex series with an AT10 profile. It measures 8400 mm in length and has a 10 mm pitch. When you are replacing a belt, start by confirming these three values against the old belt and the drive documentation.
Matching a timing belt to the one being replaced begins with the marking on the back of the old belt. Compare the profile, the length and the pitch to the AT10 profile, 8400 mm length and 10 mm pitch of this Optibelt belt. A belt that is the same profile but a different length will not seat correctly, and a different pitch will not mesh with the pulleys. If the old marking is worn or unreadable, check the drive's documentation for the specified belt.
Once you have confirmed the profile and length, check the drive before installation. Inspect the pulleys for wear, verify alignment, and confirm that the belt path is clear. On a long belt such as this 8400 mm unit, handling and storage matter: keep it clean and avoid sharp bends that could damage the tensile members. If the drive uses more than one belt, replace them as a set so the load is shared evenly.
If you need to confirm that this Optibelt 32 AT10K13 / 8400 AFX is the right belt for your application, send the part number, the profile, the length and the pitch from the old belt or the drive documentation. Our team can review the details and help you confirm the match or suggest an equivalent. You can reach us by WhatsApp or email for a quote.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 8400mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt and compare the profile, length and pitch to the AT10 profile, 8400 mm length and 10 mm pitch of this Optibelt belt. If the marking is not clear, refer to the drive documentation.
- What should I send to request a quote?
- Send the part number 32 AT10K13 / 8400 AFX, along with the profile, length and pitch from your old belt or drive documentation. If you have a photo of the belt marking, that can also help us confirm the match.
- Can you help if I am not sure this is the correct belt?
- Yes. Provide the details from the belt being replaced, and our team will review them to help confirm whether this Optibelt belt is the right fit or suggest an equivalent.