Timing belt Optibelt 32 AT10K13 / 1600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 32 AT10K13 / 1600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32 AT10K13 / 1600 AFX and any equivalents.
The Optibelt 32 AT10K13 / 1600 AFX is an Alpha Flex timing belt with an AT10 profile, a 1600 mm length and a 10 mm pitch. Before you fit it, inspect the drive and the sheaves so the new belt starts on a sound system. MR Industrial Accessories LLC supplies this belt to maintenance, engineering and purchasing teams across the US, Canada, Mexico and South America.
A timing belt is only as good as the drive it runs on. Check the sheaves for worn grooves, burrs, corrosion or debris, and confirm they are clean and correctly aligned. Look at the shafts and bearings for play, and make sure tensioners and idlers turn freely. If the old belt failed early, the cause is often in the drive rather than the belt itself.
Match the belt to the drive by profile and length. This Optibelt Alpha Flex belt is AT10 profile with a 1600 mm length and a 10 mm pitch. Read the marking on the back of the old belt and compare it with the part number 32 AT10K13 / 1600 AFX. If the drive runs more than one belt, replace the set together so all belts share the same load.
To request a quote, send the part number 32 AT10K13 / 1600 AFX by WhatsApp or email. If you are unsure about the profile or length, send a photo of the back of the old belt and the drive arrangement. The team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 1600mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for wear, burrs, corrosion and debris, and confirm they are clean and aligned. Check shafts, bearings, tensioners and idlers for play or rough rotation. Correct any drive problem before installing the new belt.
- How do I confirm this is the right belt for my drive?
- Compare the profile and length on the old belt with the AT10 profile and 1600 mm length of the Optibelt 32 AT10K13 / 1600 AFX. The pitch is 10 mm. If the marking is worn, send a photo of the belt and the drive for confirmation.
- Can you help if I need a different belt?
- Yes. Send the part number you need, or a photo of the old belt and the drive arrangement, by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent.