Timing belt Optibelt 32 AT10 / 12000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 32 AT10 / 12000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32 AT10 / 12000 AFX and any equivalents.
The Optibelt 32 AT10 / 12000 AFX is a timing belt from the Alpha Flex series. It has an AT10 profile, a 12000 mm length and a 10 mm pitch. To match it to the belt being replaced, start with the marking on the old belt.
Read the back of the belt you are replacing. The part number, profile and length should correspond to the AT10 profile, 12000 mm length and 10 mm pitch shown here. If the old marking is worn or missing, measure the length and confirm the profile before ordering.
This belt is identified by its AT10 profile and 12000 mm length. The 10 mm pitch is part of the same specification. When you request a quote, send the full part number 32 AT10 / 12000 AFX or the profile and length you measured. We carry the Optibelt Alpha Flex line and can help confirm the right belt or suggest an equivalent.
For drives that run more than one belt, inspect all belts and pulleys at the same time. Replace belts in sets when the drive is designed that way, and check pulley wear and alignment before installation. A correct match depends on the profile, length and pitch agreeing with the drive.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 12000mm
Frequently asked questions
- How do I match this Optibelt timing belt to the one I am replacing?
- Find the marking on the back of the old belt. It should show the profile and length. Compare that to the AT10 profile and 12000 mm length of the 32 AT10 / 12000 AFX. If the marking is not readable, measure the old belt and confirm the profile before ordering.
- What should I send to request a quote for this belt?
- Send the part number 32 AT10 / 12000 AFX, or the profile AT10 and length 12000 mm. If you have the old belt, include a photo of the back marking. We reply by WhatsApp or email and can help confirm the right belt or suggest an equivalent.
- Does the 10 mm pitch matter when replacing this belt?
- Yes. The 10 mm pitch is part of the belt specification along with the AT10 profile and 12000 mm length. A belt with a different pitch will not match the pulleys. Confirm all three values before ordering.