Timing belt Optibelt 25 T10 / 1200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 T10 / 1200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 T10 / 1200 AFX and any equivalents.
The Optibelt 25 T10 / 1200 AFX is an Alpha Flex timing belt in T10 profile with a 1200 mm length and 10 mm pitch. Before you fit it, the drive itself is worth a look. A new belt on worn or misaligned components will not run as intended.
Start at the sheaves. Check the tooth flanks for wear, the grooves for foreign material and the bore and mounting for play. A sheave that has worn out of shape will not mesh correctly with a new belt, so compare the old belt's tooth condition against the sheave surfaces. Confirm the shafts turn freely and that no bearing noise or end float points to a separate problem.
Alignment and tension come next. Set the two sheaves parallel and coplanar within the drive's own tolerance, then tension the belt to the specification for the application. If the drive runs more than one belt, replace the set together so the load is shared evenly. After a short run-in, recheck tension and re-torque the fasteners.
For a quote, send the part number 25 T10 / 1200 AFX and the quantity you need. If you are matching an existing belt, the marking on the back is the quickest way to confirm profile and length. Our team replies by WhatsApp or email and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- T10
- Pitch
- 10mm
- Length
- 1200mm
Frequently asked questions
- What are the profile, length and pitch of this belt?
- The 25 T10 / 1200 AFX is a T10 profile timing belt with a 1200 mm length and a 10 mm pitch.
- Should I replace the sheaves at the same time?
- Inspect them first. If the tooth flanks are worn, the grooves are damaged or there is play in the mounting, the sheaves should be replaced so the new belt meshes correctly.
- How do I request a quote?
- Send the part number 25 T10 / 1200 AFX and your quantity by WhatsApp or email. The team replies promptly and can help confirm the belt for your drive.