Timing belt Optibelt 25 AT20 / 2800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 AT20 / 2800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 AT20 / 2800 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 25 AT20 / 2800 AFX. It uses an AT20 profile and a 2800 mm length, with a 20 mm pitch. It is a synchronous belt intended for drives where exact positioning and speed control are required.
Timing belts like this are used on industrial equipment such as conveyors, packaging machines, and other drives that rely on tooth engagement rather than friction. The AT20 profile and 20 mm pitch define the tooth shape and spacing, while the 2800 mm length sets the belt's circumference. These three values are the key dimensions to match when replacing a belt on a synchronous drive.
To confirm fit, check the marking on the back of the old belt and compare it with the code 25 AT20 / 2800 AFX. The profile must be AT20, the length must be 2800 mm, and the pitch must be 20 mm. If the marking is worn or unreadable, measure the old belt and note the tooth profile and pitch before requesting a quote.
When you contact us, send the part number and any photos of the old belt and its marking. Our team can confirm the correct belt or suggest an equivalent based on the profile, length, and pitch.
Dimensions
- Profile
- AT20
- Pitch
- 20mm
- Length
- 2800mm
Frequently asked questions
- What does the code 25 AT20 / 2800 AFX mean?
- The code identifies this Optibelt Alpha Flex timing belt. It has an AT20 profile, a 2800 mm length, and a 20 mm pitch.
- How do I confirm this belt fits my drive?
- Check the marking on the back of your old belt. It should show the same profile, length, and pitch. If the marking is not clear, measure the old belt and note the tooth shape and spacing.
- What information should I send for a quote?
- Send the part number 25 AT20 / 2800 AFX, along with photos of the old belt and its marking if possible. That helps us confirm the right belt or suggest an equivalent.