Timing belt Optibelt 25 AT20 / 2600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 AT20 / 2600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 AT20 / 2600 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 25 AT20 / 2600 AFX. It has an AT20 profile, a 2600 mm length, and a 20 mm pitch. Use these three values to confirm the belt matches your drive before you request a quote.
Timing belts in this profile and length range are found on industrial drives where synchronous power transmission and accurate positioning are required. The AT20 profile and 2600 mm length define the belt's fit, so compare them directly with the marking on your existing belt and the drive's pulley dimensions.
To confirm fit, read the back of the old belt and match the profile, length, and pitch to the values here: AT20, 2600 mm, and 20 mm. If the marking is worn or unreadable, measure the belt's length along its back and check the pulley groove profile. Send the part number or your measurements by WhatsApp or email and our team will help confirm the correct belt or suggest an equivalent.
When you request a quote, include the part number 25 AT20 / 2600 AFX and the quantity you need. If you are replacing belts on a multi-belt drive, note how many the drive uses so we can quote the full set.
Dimensions
- Profile
- AT20
- Pitch
- 20mm
- Length
- 2600mm
Frequently asked questions
- How do I confirm this Optibelt timing belt fits my drive?
- Check the marking on the back of your current belt for the profile AT20, length 2600 mm, and pitch 20 mm. Also verify the pulley groove profile matches AT20. If you cannot read the marking, send photos and measurements of the old belt and pulleys.
- What information should I send with my quote request?
- Send the part number 25 AT20 / 2600 AFX, the quantity required, and any details about the drive or the old belt. If you are unsure of the part number, include the belt's profile, length, and pitch, or photos of the marking.
- Can you help if I need a different length or profile?
- Yes. If your drive requires a different profile or length, send the details and our team will help identify the correct Optibelt belt or suggest an equivalent.