Timing belt Optibelt 25 AT10K13 / 11200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 AT10K13 / 11200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 AT10K13 / 11200 AFX and any equivalents.
When a timing belt has to come off, the fastest way to get the right replacement is to match the belt in your hand against the data on the new one. This Optibelt Alpha Flex belt is identified by the code 25 AT10K13 / 11200 AFX, an AT10 profile and a length of 11200 mm. Read the marking on the back of the old belt and compare it field by field before you order.
Start with the profile. The AT10 designation on this belt is the profile reference, and it has to agree with the profile called out on the belt you are replacing. Then check the length. This belt is listed at 11200 mm, with a pitch of 10 mm. If the length on your old belt differs, the replacement will not sit correctly on the pulleys no matter how close the profile looks.
The full code 25 AT10K13 / 11200 AFX is the reference to send when you request a quote. Photograph the back of the old belt so the marking is legible, and include the width figure that appears in the code along with the profile and length. If the drive runs more than one belt, note how many positions you are replacing so the set can be quoted together.
We carry Optibelt Alpha Flex timing belts for maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America. Send the part number by WhatsApp or email and the team will confirm the belt or point you to the closest match.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 11200mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Compare the marking on the back of the belt being replaced with the code 25 AT10K13 / 11200 AFX. The profile must be AT10 and the length must be 11200 mm. The pitch is 10 mm.
- What should I send with my quote request?
- Send the full part number 25 AT10K13 / 11200 AFX, and a clear photo of the marking on the old belt. If the drive uses multiple belts, tell us how many you need.
- Can you help if the marking on my old belt is worn?
- Yes. Send whatever is still readable along with the profile and length you measured or found in the machine documentation, and the team will help confirm the match.