Timing belt Optibelt 25 AT10 / 3000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 AT10 / 3000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 AT10 / 3000 AFX and any equivalents.
The Optibelt Alpha Flex 25 AT10 / 3000 AFX is a timing belt with an AT10 profile, a 3000 mm length, and a 10 mm pitch. When you are replacing a belt, the most reliable approach is to match the marking on the old belt to this part number and confirm the profile and length before ordering.
Start by reading the back of the belt you are removing. If it shows AT10 and 3000 mm, this Optibelt Alpha Flex belt is the same profile and length. The 10 mm pitch is part of the AT10 profile, so those two details should agree with what is stamped or printed on the old belt.
If the marking is worn off, measure the length along the belt and check the tooth profile against the drive pulleys. The AT10 profile and 3000 mm length are the key selection points. Send us the part number from the old belt, or a photo of the marking and the pulley, and we can help confirm this belt or suggest an equivalent.
This is a timing belt, also called a synchronous belt, so it is selected by profile and length rather than by cross-section. We carry the Optibelt Alpha Flex line and can quote the 25 AT10 / 3000 AFX by part number. Provide the quantity and the drive it fits, and we will reply promptly.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 3000mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt for AT10 and 3000 mm. If those match, the profile and length are the same as the Optibelt 25 AT10 / 3000 AFX. The 10 mm pitch is part of the AT10 profile.
- What information should I send for a quote?
- Send the part number 25 AT10 / 3000 AFX, the quantity you need, and any marking from the old belt. If the marking is not readable, a photo of the belt and the pulley helps us confirm the profile and length.
- Can you suggest an equivalent if this exact belt is not what I need?
- Yes. If you send the old belt's marking or dimensions, we can help confirm the Optibelt Alpha Flex 25 AT10 / 3000 AFX or suggest an equivalent with the same AT10 profile and 3000 mm length.