Timing belt Optibelt 25 / 8M 2200 AFX

OPTIBELT 25 / 8M 2200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 / 8M 2200 AFX and any equivalents.

The Optibelt 25 / 8M 2200 AFX is an Alpha Flex timing belt with an HTD 8M profile, a 2200 mm length and an 8 mm pitch. When you are replacing a belt on a synchronous drive, the marking on the back of the old belt is the fastest way to confirm what you need.

Read the old belt before you order. The back of a timing belt usually carries its profile and length, and this Optibelt belt is identified by the HTD 8M profile and the 2200 mm length. If the existing belt is worn, oiled or the marking has rubbed off, note the drive's pulleys and the belt's width so the replacement can be checked against the same profile and length.

Match profile and length first. An HTD 8M belt with a 2200 mm length will only sit correctly on pulleys cut for the same profile and pitch. Do not substitute a belt of a different profile or length, even if it appears close, because the teeth will not engage the pulley grooves as intended.

For a quote, send the part number 25 / 8M 2200 AFX, or the profile and length from the old belt. If you are unsure, a photo of the belt marking and the drive helps us confirm the correct Optibelt Alpha Flex timing belt.