Timing belt Optibelt 25 / 8M 2000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 / 8M 2000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 / 8M 2000 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 25 / 8M 2000 AFX. It uses the HTD 8M profile with a 2000 mm length and an 8 mm pitch. It is a synchronous belt intended for drives where tooth engagement and precise positioning are required.
Timing belts of this type are common on industrial drives such as conveyors, packaging equipment, and other machinery where the belt must mesh with matching pulleys. The HTD 8M profile and 8 mm pitch mean the belt fits pulleys cut to the same profile and pitch. The 2000 mm length is the datum for matching the existing belt on the drive.
To confirm fit, read the marking on the back of the old belt and compare it with 25 / 8M 2000 AFX. Check that the pulley grooves match the HTD 8M profile and that the belt width corresponds to the 25 marking. Also inspect the drive for worn pulleys, misalignment, or damaged teeth before ordering a replacement.
If you are unsure whether this belt is the correct one, send the full belt code, the pulley tooth count, and the center distance to our team. We can help confirm the right belt or suggest an equivalent. Quotes are handled by WhatsApp or email using the part number.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 2000mm
Frequently asked questions
- How do I confirm that this belt fits my drive?
- Compare the marking on your old belt with 25 / 8M 2000 AFX. Verify that the pulleys are HTD 8M profile with an 8 mm pitch and that the belt width matches the 25 marking. If the old belt is unreadable, measure the length and count pulley teeth, then send those details for confirmation.
- What does the 2000 mm length refer to?
- It is the belt length as given in the product data. The belt also has an 8 mm pitch and an HTD 8M profile. These three values are the key dimensions for matching the belt to the drive.
- Can you help if I need a different length or profile?
- Yes. Send the part number you need, or the old belt marking and drive details. We carry Optibelt belts and can help confirm the correct item or suggest an equivalent based on the profile, pitch, and length.