Timing belt Optibelt 2200 8MHP SL 500
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 2200 8MHP SL 500 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2200 8MHP SL 500 and any equivalents.
The Optibelt 2200 8MHP SL 500 is a timing belt in the Omega HP series with an HTD 8M profile, a length of 2200 mm and a pitch of 8 mm. If you are replacing a belt on a synchronous drive, this page gives you the details needed to confirm it matches the belt coming off.
The most reliable way to match a replacement is to read the marking on the back of the old belt. Compare the profile and the length directly: the 2200 8MHP SL 500 is an HTD 8M profile belt, 2200 mm long, with an 8 mm pitch. If the marking on your belt shows the same profile and length, this is the correct part to specify.
Length and profile are what locate the belt on the pulleys; the pitch is what lets the teeth mesh correctly. A belt of the same length but a different profile will not seat, and a belt of the same profile but a different length will not tension. Check both against the old marking before you order.
Send the part number 2200 8MHP SL 500 by WhatsApp or email to request a quote. If you are unsure, send a photo of the back of the old belt and the drive details, and the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 2200mm
Frequently asked questions
- How do I confirm the 2200 8MHP SL 500 is the belt I need?
- Read the marking on the back of the belt being replaced. The profile should be HTD 8M, the length 2200 mm and the pitch 8 mm. Match those to the Optibelt 2200 8MHP SL 500.
- What does the SL 500 in the part number mean?
- We do not interpret the manufacturer's part number codes. The specification to work from is the profile, HTD 8M, and the length, 2200 mm, both shown on this page.
- Can I get help if the marking on my old belt is unreadable?
- Yes. Send a photo of the belt and the drive by WhatsApp or email, along with the part number 2200 8MHP SL 500, and the team can help confirm the right belt or suggest an equivalent.