V-belt Optibelt 22 x 4500 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 4500 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 4500 Li and any equivalents.
This page covers the Optibelt VB S=C Plus classical V-belt in profile C, with a top width of 22 mm, a height of 14 mm and a 40-degree angle. The listed length is 4500 mm. Use the marking on the belt you are replacing to confirm this is the correct one before you order.
The most reliable way to match a classical V-belt is to read the marking on the back of the old belt. For this Optibelt VB S=C Plus, the marking identifies profile C and a 4500 mm length. Compare that to the belt in your hand: profile, top width and length should correspond. The 22 mm top width and 14 mm height are the dimensions for profile C in this construction.
If the old belt marking is worn or unreadable, measure the outside length and check the drive sheave groove to confirm the profile. A 40-degree angle and a 22 mm top width point to a C profile. Do not substitute a different profile or length without checking the drive, because the belt must sit correctly in the groove and run at the right length.
When you request a quote, send the part number 22 x 4500 Li and the quantity you need. If you are replacing more than one belt on the same drive, list all the belts so we can help you confirm each one. We carry Optibelt VB S=C Plus and can reply to your WhatsApp or email with the information you need to complete the order.
Dimensions
- Section
- C
- Length
- 4500mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt you are replacing. It should show profile C and a 4500 mm length. If it does, this Optibelt VB S=C Plus matches. If the marking is unreadable, measure the top width and the length, and check that the sheave groove accepts a 22 mm top width.
- What does 22 x 4500 Li mean on this belt?
- The 22 is the top width in millimeters, and 4500 is the length in millimeters. Li indicates the length is listed in millimeters. The profile is C, with a height of 14 mm and a 40-degree angle.
- What should I send to get a quote?
- Send the part number 22 x 4500 Li and the quantity you need. If you are replacing several belts on the same drive, include all the part numbers so we can help you match each one.