V-belt Optibelt 22 x 4445 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 4445 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 4445 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt in profile C, with a top width of 22 mm and a height of 14 mm. The 40-degree angle and 4445 mm length identify it as a long-span classical belt for drives that use C-profile pulleys.
The marking 22 x 4445 Li gives you the two dimensions that matter most when matching a belt to a drive: the 22 mm top width, which corresponds to the C profile, and the 4445 mm length. The 14 mm height and 40-degree angle complete the profile. If your pulley groove is cut for a C-section classical V-belt, this is the profile to specify.
Because classical V-belts are often replaced on drives that have been in service for years, the part number is the safest reference. Read the marking on the back of the old belt and compare it with 22 x 4445 Li. If the old belt is worn or the marking is unreadable, measure the top width and the outside length, then send those figures with your quote request.
When you request a quote, include the part number 22 x 4445 Li and the quantity you need. If you are replacing belts on a multi-belt drive, note how many belts the drive takes so the set can be quoted together. Our team replies by WhatsApp or email and can help confirm the right belt for your application.
Dimensions
- Section
- C
- Length
- 4445mm
Frequently asked questions
- What does the 22 x 4445 Li marking tell me?
- The 22 indicates a top width of 22 mm, which is the C profile. The 4445 Li indicates a length of 4445 mm. Together with the 14 mm height and 40-degree angle, these are the dimensions you use to match the belt to your drive.
- How do I confirm this is the correct replacement?
- Check the marking on the back of the belt you are replacing. If it reads 22 x 4445 Li, this Optibelt VB S=C Plus belt matches that profile and length. If the marking is worn, measure the top width and length and send those values with your request.
- What information should I send for a quote?
- Send the part number 22 x 4445 Li, the quantity, and the number of belts the drive uses if it is a multi-belt drive. Our team replies by WhatsApp or email and can help confirm the right belt.