V-belt Optibelt 22 x 3658 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 3658 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 3658 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt in profile C, with a 22 mm top width, 14 mm height, 40-degree angle and a 3658 mm length. Before you fit it, inspect the drive so the new belt is not damaged by worn sheaves or misalignment.
Check the sheave grooves for wear, cracks, burrs or embedded debris, and confirm the grooves match the belt's C profile and 40-degree angle. Look for a step or ridge in the groove that can ride against the belt and shorten its life. Verify that the shafts are parallel and the sheaves are aligned, since misalignment is a common cause of premature belt failure.
Confirm the belt length and cross-section against the old belt's marking. This belt is 3658 mm long, 22 mm wide at the top and 14 mm high. If a drive uses multiple belts, replace the full set at the same time so the load is shared evenly; mixing a new belt with worn belts can overload the new one.
Send the part number and the quantity you need by WhatsApp or email to request a quote. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 3658mm
Frequently asked questions
- What are the dimensions of this Optibelt VB S=C Plus belt?
- It is a classical V-belt in profile C with a 22 mm top width, 14 mm height, 40-degree angle and 3658 mm length.
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear, cracks, burrs or debris, confirm the grooves match the C profile and 40-degree angle, and check that the shafts are parallel and the sheaves are aligned.
- How do I request a quote for this belt?
- Send the part number and the quantity you need by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent.