V-belt Optibelt 22 x 3550 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 3550 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 3550 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a C profile, a top width of 22 mm, a height of 14 mm and a 40-degree angle. Its length is 3550 mm. The part number 22 x 3550 Li identifies the same profile and length, so you can match it directly to the belt you are replacing.
For a maintenance, engineering or purchasing professional, the profile and length are the two values that decide fit. Profile C sets the cross-section and the 40-degree angle that seats in the pulley groove. The 3550 mm length places the belt on the drive. Top width is 22 mm and height is 14 mm. Confirm these against the old belt before you request a quote.
The marking on the back of the belt is the fastest way to verify a match. Read the profile and the length, then compare them with 22 x 3550 Li. If the old belt is worn or the marking is gone, measure the top width and the outside length and send those values with your quote request.
Send the part number 22 x 3550 Li by WhatsApp or email. If you are replacing more than one belt on the same drive, include the quantity and the position. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 3550mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- Profile C defines the cross-section, the 22 mm top width, the 14 mm height and the 40-degree angle. The 3550 mm length defines where the belt sits on the drive. Together they are the two values to match when replacing a classical V-belt.
- How do I confirm this belt matches the one on my drive?
- Read the marking on the back of the old belt and compare the profile and length with 22 x 3550 Li. If the marking is not readable, measure the top width and the outside length and include those values with your quote request.
- What should I send to request a quote?
- Send the part number 22 x 3550 Li, the quantity and the drive position. If you are replacing a set, include the number of belts on the drive so the team can confirm the right belt or suggest an equivalent.