V-belt Optibelt 22 x 3099 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 3099 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 3099 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a C profile, a top width of 22 mm, a height of 14 mm, and a 40-degree angle. It is used in industrial drives where a classical V-belt is specified, such as on pumps, fans, and compressors. The length is 3099 mm, and the belt is identified by the code 22 x 3099 Li.
Classical V-belts like this Optibelt VB S=C Plus are common in general industrial power transmission. The C profile is a standard cross-section, and the 40-degree angle is designed to seat in the matching pulley groove. To confirm fit, check that the drive uses a C profile and that the belt length matches the original. The length is given as 3099 mm, and the top width is 22 mm, with a height of 14 mm.
When replacing a belt, note the marking on the back of the old belt. The code 22 x 3099 Li identifies this belt, and the profile and length should match the original specification. If the old belt is worn or the marking is unreadable, measure the top width and the outside length to compare with the data here. For a quote, send the part number 22 x 3099 Li, along with the profile and length if known.
Dimensions
- Section
- C
- Length
- 3099mm
Frequently asked questions
- What does the code 22 x 3099 Li mean?
- The code 22 x 3099 Li is the belt's identification. The 22 refers to the top width in millimeters, and 3099 Li refers to the length in millimeters. This belt has a C profile, a top width of 22 mm, a height of 14 mm, and a 40-degree angle.
- How do I confirm this belt fits my drive?
- Check that your drive uses a C profile pulley and that the required belt length is 3099 mm. Compare the top width and height of your old belt with the 22 mm and 14 mm dimensions. If the old belt is marked 22 x 3099 Li, this is the correct replacement.
- What information do I need to request a quote?
- Send the part number 22 x 3099 Li, along with the profile and length if known. If you have the old belt, note any markings on the back. Our team can confirm the belt or suggest an equivalent based on the data you provide.