V-belt Optibelt 22 x 2642 Li

OPTIBELT 22 x 2642 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 2642 Li and any equivalents.

The Optibelt VB S=C Plus is a classical V-belt with a C profile. The marking 22 x 2642 Li gives you the top width and the length reference. Read that marking on the back of the old belt before you order.

A worn belt often keeps its marking legible even when the surface is glazed or cracked. Wipe the back of the belt and note the full code, including the profile letter and the Li length. On this belt the profile is C, the top width is 22 mm, the height is 14 mm, the angle is 40 degrees, and the length is 2642 mm. Those values let you match the replacement without measuring a stretched belt on the drive.

If the marking is rubbed off, check the drive for the sheave groove and the belt cross-section. The C profile is a classical V-belt section, and the 22 mm top width confirms it. The 2642 mm length is the reference you need for the replacement. Send the complete code, 22 x 2642 Li, when you request a quote.

When you replace a classical V-belt, inspect the sheaves for wear and misalignment before the new belt goes on. A belt that runs hot or slips can point to a groove problem rather than a belt problem. If the drive uses more than one belt, order the same code for each position so the set matches.