Timing belt Optibelt 1904 8M 50 HILO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Load
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1904 8M 50 HILO belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1904 8M 50 HILO and any equivalents.
The Optibelt 1904 8M 50 HILO is an Omega High Load timing belt built on the HTD 8M profile. It is a synchronous belt for drives where the belt teeth mesh with a matching pulley to keep the driven shaft in step with the driver. This listing covers the belt only, identified by its profile, pitch and length.
Timing belts in this class are common on industrial drives that must hold a fixed relationship between shafts: process and packaging machinery, pumps, compressors, fans and similar equipment. The HTD 8M profile is a curvilinear tooth form, and the 8 mm pitch and 1904 mm length define the pulley spacing and the number of teeth in mesh. The 50 in the part number refers to the belt width as supplied by the manufacturer.
To confirm fit, read the marking on the back of the belt you are replacing and compare profile, pitch and length against this listing. Check the pulleys for worn or hooked teeth, and check that the belt tracks squarely and that tension is set to the drive maker's specification. If the old belt is unreadable, measure the length and count teeth rather than relying on a partial number.
Send us the part number, the profile and length from the old belt, and the pulley tooth counts if you have them. We carry Optibelt and can help confirm the right belt or suggest an equivalent from the same series. Quotes are handled by WhatsApp or email, and the team replies promptly.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1904mm
Frequently asked questions
- How do I know this is the correct belt for my drive?
- Match the profile, pitch and length to the marking on your old belt or to your drive documentation. This belt is HTD 8M profile, 8 mm pitch, 1904 mm length. If the marking is worn off, send us the pulley tooth counts and center distance and we will help confirm.
- Can I replace just one belt on a multi-belt drive?
- On drives running more than one belt, replacing them as a set keeps load sharing even and avoids mismatched wear. Send the quantity and the part number, and we will quote accordingly.
- What information should I send for a quote?
- Send the part number 1904 8M 50 HILO, or the profile, pitch and length from the old belt, along with the quantity. If you are unsure of the number, a photo of the belt marking helps us confirm the right item.