Timing belt Optibelt 1904 8M 20 HILO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Load
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1904 8M 20 HILO belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1904 8M 20 HILO and any equivalents.
The Optibelt 1904 8M 20 HILO is an Omega High Load timing belt with an HTD 8M profile, a 1904 mm length and an 8 mm pitch. Before you fit it, inspect the drive and sheaves so the new belt runs true from the first start.
Check the sheaves for worn grooves, burrs or debris that can damage the belt teeth. Confirm the shafts turn freely and that the pulleys are aligned. A drive that is not clean and square will shorten the life of any timing belt, including this one.
Verify the part number on the back of the old belt matches 1904 8M 20 HILO. The profile is HTD 8M, the length is 1904 mm and the pitch is 8 mm. If the marking is worn, measure the old belt and note the tooth profile before ordering.
Send the part number 1904 8M 20 HILO by WhatsApp or email to request a quote. If you are unsure about the profile or length, include photos of the old belt and the drive so we can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1904mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect the sheaves for wear, burrs and debris, confirm the shafts turn freely, and check that the pulleys are aligned. A clean, aligned drive helps the belt seat correctly.
- How do I confirm the old belt matches the 1904 8M 20 HILO?
- Read the marking on the back of the old belt. It should show the same part number. If it is unreadable, measure the length and identify the profile as HTD 8M with an 8 mm pitch.
- What do I send to request a quote?
- Send the part number 1904 8M 20 HILO by WhatsApp or email. If you need help confirming the belt, include photos of the old belt and the drive.