V-belt Optibelt 17 x 6477 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 6477 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 6477 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt in profile B, with a top width of 17 mm, a height of 11 mm and a 40-degree angle. It is used on industrial drives where a classical V-belt cross-section is specified, such as fans, pumps, compressors and other plant equipment. The belt is identified by the code 17 x 6477 Li, so the profile and length can be checked against the drive before ordering.
To confirm fit, read the marking on the back of the old belt and compare it with this code. The profile is B, the top width is 17 mm, the height is 11 mm and the angle is 40 degrees. The length is 6477 mm. If the existing belt shows the same profile and length, this Optibelt VB S=C Plus belt is the correct match. Where a drive runs more than one belt, replace the full set so the belts share the load evenly.
Inspect the pulleys and the drive before fitting. Check for worn grooves, misalignment, oil or debris, and correct any fault that caused the old belt to fail. A classical V-belt in profile B is used across many industrial drives, so the part number on the belt is the reliable way to identify the replacement.
Send the part number 17 x 6477 Li by WhatsApp or email to request a quote. Our team can confirm the belt from the code and help you compare it with the marking on your old belt.
Dimensions
- Section
- B
- Length
- 6477mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt against the code 17 x 6477 Li. This belt has a B profile, a top width of 17 mm, a height of 11 mm, a 40-degree angle and a length of 6477 mm. If those figures match the old belt, it is the correct replacement.
- What should I send to request a quote?
- Send the part number 17 x 6477 Li by WhatsApp or email. If you can, include a photo of the marking on the old belt so we can confirm the profile and length.
- Should I replace more than one belt at a time?
- If the drive uses several belts, replace the full set at the same time. Belts that have run together wear together, and mixing a new belt with used belts can cause uneven loading.