V-belt Optibelt 17 x 6300 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 6300 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 6300 Li and any equivalents.
The Optibelt VB S=C Plus 17 x 6300 Li is a classical V-belt with a B profile. It measures 17 mm across the top, 11 mm high, and 6300 mm long, with a 40-degree angle. To match it, read the marking on the belt you are replacing and compare profile and length.
Start with the belt you are replacing. Check the back of the belt for a marking such as 17 x 6300 Li or B 6300. The profile is B, the top width is 17 mm, the height is 11 mm, and the angle is 40 degrees. The length is 6300 mm. If the old belt is worn or the marking is gone, measure the top width and the outside length to confirm you have the same size.
A B profile belt will not fit a drive cut for a different profile, even if the length is close. Confirm the drive uses a B section, then verify the 6300 mm length. If the belt runs in a set, replace all belts in the set at the same time so they share the load evenly. Inspect the sheaves for wear, rust or debris before installing the new belt.
Send the part number 17 x 6300 Li, or the marking from your old belt, by WhatsApp or email to request a quote. If you are unsure of the profile or length, include photos of the belt marking and the drive. We can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 6300mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the belt you are replacing. It should show a B profile and a 6300 mm length, or 17 x 6300 Li. If the marking is unreadable, measure the top width (17 mm) and the outside length (6300 mm) and compare to the drive.
- Can I replace just one belt in a set?
- If the drive uses multiple belts, replace the full set at the same time. Belts that have run together wear evenly, and mixing a new belt with old ones can cause uneven load sharing.
- What information should I send for a quote?
- Send the part number 17 x 6300 Li, or the full marking from your old belt, by WhatsApp or email. If you are unsure, include the profile and length from the belt or photos of the marking and the drive.