V-belt Optibelt 17 X 12500 CP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 X 12500 CP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 X 12500 CP and any equivalents.
This Optibelt 17 X 12500 CP belt is a classical V-belt from the Conveyor Power series, with a B profile and a 12500 mm length. It is built for long-center drives where a single belt spans a considerable distance between pulleys. Use the profile and length to confirm it matches the drive you are replacing.
Classical V-belts in this size range are common on long-run industrial drives such as line shafting, large fans, and bulk handling equipment. The B profile gives a 17 mm top width, 11 mm height, and a 40 degree angle, so the belt seats correctly in standard B-section pulleys. The 12500 mm length suits drives with widely spaced shafts where a shorter belt would not reach.
To confirm fit, read the marking on the back of the old belt and compare the profile letter and length. Check the pulley grooves for wear, alignment, and any debris that could affect seating. If the drive uses multiple belts, replace them as a set so the load stays evenly distributed.
Send the part number 17 X 12500 CP, the profile, and the length when you request a quote. If you are unsure whether this is the correct belt for your drive, include the old belt marking and the pulley dimensions, and the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 12500mm
Frequently asked questions
- What does the B profile mean for this belt?
- The B profile is a classical V-belt section with a 17 mm top width, 11 mm height, and 40 degree angle. It fits pulleys machined for B-section belts.
- How do I confirm the 12500 mm length is correct?
- Check the marking on the back of the belt you are replacing. If it shows the same profile and length, this belt matches. You can also measure the drive center distance and pulley diameters to verify.
- What information should I send for a quote?
- Send the part number 17 X 12500 CP, the profile, and the length. If you have the old belt marking or pulley details, include those as well so the team can confirm the fit.